|
|
ALOCHOL TESTER : CA2010
|
|
|
|

|
|
PRODUCT
SYNOPSIS
|
|
|
|
CA2010 is an unique
& highly-sophisticated alcohol analyzer utilizing the variation of
electrical property value of the oxide-semiconductor when the alcohol substance is detected. And, with
the development of new ceramic material combined with relevant catalyst, it can
selectively analyze the alcohol
concentration to the ppm unit existing in the human breath. Our laboratory made
it in developing the highly-selective semi-conductive sensor (CA2010)reactive to alcohol substance
only, which can be differentiated from the other semi-conductive sensor products
(which are often affected by the other substances like smokes and smells of
food). Furthermore, it did improve to the large extent the standby, response
& recovery time which could be crucial in measuring gas
concentration.
* Detection mechanism of our unique semi-conductive sensor When the oxide having the property of n-type
conductivity is open to the atmosphere, it decreases the number of electron
affecting on electrical property by the adsorbed oxygen and results in increasing the resistance. And, afterwards, if the specific gas
(reducing gas) exists in the atmosphere,
it reacts with the adsorbed oxygen and
increase the electron in the oxide, resulting in decreasing the resistance. So
to speak, the electrical property of the oxide is getting changed when a
specific gas is exposed from the outside and our sensor can analyze the gas
concentration from the variation of quantity.
** Remark: Conditions that increase the amount
of ketones on the breath, such as diabetes and low caloric intake, may cause a
false positive test. (i.e., showing a non-zero reading despite not drinking
alcohol)
|
|
FEATURES
|
|
|
|
1) The cutting edge alcohol sensor technology : CA2010 adopts a highly-selective semiconductor sensor (reactive to only alcohol substance) designed by KAIST(Korea Advanced Institute of Science and Technology ). CA2010 is an unique breath tester adopting thismost sophisticated technology of sensor. 2) Stable testing data : It allows you to get stable data for successive testing. 3) Dual light LCD display : It displays by 3 digits (0.xx% BAC/BRAC) on LCD together with sound in each stage. 4) Wide detection range : 0.00 ~ 0.40% BAC or 0.00 ~ 2.00 BRAC. 5) Long-term stability : CA2010 can analyze very precisely even after long time of uses. 6) Flow check technology : Display “Err” in case that you don’t blow steadily and/or continuously for 3 - 5 seconds into the Mouthpiece 7) Calibration check technology : This feature is to check periodically to ensure whether it is in good condition or needs for re-calibration. 8) Short warm-up & response Time : After power on, less than 20sec. of warming up count up (000 to 100%) is needed to make it ready for testing. And, exhaling just for a few seconds will reach you to instantly read the testing numeric digits. 9) Quick Recovery Time : The sensor of CA2010 can be purged in 30seconds for another time of testing. You don’t need to be too patient to do consecutive testing. 10) Easy calibration & longer sensor life time : 3,000 times testing 11) Power : 9V Alkaline battery & one cigar Jack DC adapter included 12) Sanitary Testing : CA2010 includes 3pcs of mouthpiece for sanitary direct testing. 13) Compact & light weight hand-held device 14) Sophisticated and elegant design : 15) CA2010 is adopted with titanium colored glossy front panel & soft touch grip back panel * breathalyzer, alcohol breath tester, ca2010, ca-2010, alcohol detector, alcohol tester at ca2010, breathalyzer alcohol tester, digital alcohol tester, digital alcohol meter, digital alcohol breathalyzer, ca2010, ca-2010, alcohol tester, alcohol breath tester, breath alcohol tester,
|
|
SPECIFICATION
|
|
|
|
Description |
Specification |
Size |
5.6 x 12.3 x 2.3 cm / 2.2 x 4.8 x
0.9 inch |
Weight |
111g / 3.9oz (with a battery and a
mouthpiece) |
Sensor
|
Highly selective semi-conductive
oxide alcohol sensor |
Response time |
3 ~ 5 sec. |
Warm up time |
20 sec. |
Battery life |
Over 300
tests |
Battery |
9V
alkaline |
External power
supply |
12V DC
adapter |
Accuracy |
≤±0.10mg/ml (Promile) at 1.00mg/ml (Promile) |
Calibration |
BAC simulator(Model Guth10-4/Guth
Laboratory,USA) |
Digital
display |
Dual color LCD backlight / Three digits in numeric
readout |
Working temp. |
+10'C ~ +40'C |
Storage temp. |
0'C ~ +50'C |
Packing |
Tester, 9V alkaline,Cigar-Jack DC
adapter, 3 pcs of mouthpieces, User’s manual, Carrying
Bag |
Warranty |
1 year limited warranty |
|
*Specifications are subject to be changed without prior notice for functional
improvements
|
|
CONTENTS
|
|
|
|
- Alcohol Tester - 9V Battery - Car adapter - 3 pcs of Mouthpieces - Hard case - Carrying bag - Color unit package - Strap - User's Manual
|
- CATALOGUE
|
 |
- CE CERTIFICATE
|

|
- MANUAL
|

|
|
|
|
|
|
|
|
|
|
|
|
|